Contrast sensitivity testing
Schedule an exam.Find Eye Doctor
A contrast sensitivity test measures your ability to distinguish between finer and finer increments of light versus dark (contrast).
Contrast sensitivity is a very important measure of visual function, especially in situations of low light, fog or glare, when the contrast between objects and their background often is reduced. Driving at night is an example of an activity that requires good contrast sensitivity for safety.
Even if you have 20/20 visual acuity, you can have eye or health conditions that may diminish your contrast sensitivity and make you feel that you are not seeing well.
Symptoms of reduced contrast sensitivity
If you have low contrast sensitivity, you may have problems with night driving, including difficulty seeing pedestrians walking alongside poorly lit streets. Or you might notice that your eyes tire more easily while reading or watching television.
Poor contrast sensitivity also can increase your risk of a fall if you fail to see that you need to step down from a curb onto similarly colored pavement.
For example, sometimes a person who has LASIK may be able to see 20/20 after the procedure but complains of poor night vision. This could be caused by a loss of contrast sensitivity from the surgery.
Conversely, some people achieve better contrast sensitivity and night vision after LASIK, compared with their vision with glasses or contact lenses before the procedure.
In most cases, people with cataracts notice a significant improvement in both visual acuity and contrast sensitivity after cataract surgery.
Contrast sensitivity testing
Contrast sensitivity testing often isn't included in a routine eye exam. Your eye doctor might perform the test because of a specific visual complaint you have or because he or she suspects you have a condition that is affecting your ability to discern contrast.
Probably the most widely used device to test contrast sensitivity is the Pelli Robson contrast sensitivity chart.
Like a standard Snellen visual acuity chart, the Pelli Robson chart consists of horizontal lines of capital letters. But instead of the letters getting smaller on each successive line, it is the contrast of the letters (relative to the chart background) that decreases with each line.
Other, more sophisticated devices also may be used to test your contrast sensitivity. These devices often use targets called sine-wave gratings that consist of a number of fuzzy, parallel bars of light and dark. These bars can vary in width (spatial frequency) as well as contrast from target to target, to give a more thorough evaluation of how sensitive your eyes are to differences in contrast.
Some sine-wave grating tests include a bright light source that can be directed toward your eyes during the test to simulate glare situations such as oncoming headlights during night-driving.
If your eye doctor determines that you need a contrast sensitivity test, it likely will be administered after a standard visual acuity test and before your pupils are dilated.
For evaluation of eye disease, contrast sensitivity usually is tested on each eye individually.
For other reasons, such as sports vision testing or to evaluate vision after contact lens fitting, LASIK or cataract surgery, the testing might be done with both eyes open.
Contrast sensitivity function (CSF)
Detailed contrast sensitivity measurements that include both size (spatial frequency) and contrast are used to plot a person's contrast sensitivity function (CSF).
Sine-wave grating targets with thicker bars represent low spatial frequencies; targets with thinner bars represent higher spatial frequencies. In this regard, determining a person's CSF is much like evaluating the sensitivity of his or her hearing, which involves using tones of low and high pitch as well as variations in volume.
Your contrast sensitivity function essentially is a plotting of the curve that defines the lowest contrast level that you can detect for each spatial frequency tested.
Generally, objects with high spatial frequencies (sine-wave gratings with very thin bars) must have significantly higher contrast than objects with lower spatial frequencies (gratings with medium-width bars) to be detected by the human visual system.
What can be done about poor contrast sensitivity?
Your contrast sensitivity test results can help your eye doctor determine if you have vision errors known as higher-order aberrations or some other problem that could be corrected with special eyewear or eye surgery.
If you are diagnosed with low contrast sensitivity, your eye doctor might advise you to wear corrective lenses with a yellow filter to improve your ability to discern contrast.
If you need prescription eyeglasses, many people find that they see better in low-light conditions when wearing lenses that include anti-reflective coating, compared with wearing the same prescription lenses without AR coating.
Also, eyeglasses with custom wavefront lenses sometimes can improve contrast sensitivity and night vision.
In some cases, custom or wavefront LASIK can reduce higher-order aberrations and improve contrast sensitivity.
See an eye doctor
The only way to know for sure that you have normal contrast sensitivity is to see an eye doctor.
Ready to have your eyes checked? Find an eye doctor near you.
Page updated June 2019