Intacs Corneal Inserts or Implants: A Proven Treatment for Keratoconus
By Rob Murphy; reviewed by Brian Boxer Wachler, MD, and Charles Slonim, MD
Intacs corneal inserts or implants are a minimally invasive surgical option primarily now used for correcting bulging (keratoconus) caused by thinning of the eye's front surface. Originally approved by the U.S. Food and Drug Administration in 1999 for mild myopia (-1.0 to -3.0 diopters), Intacs (Addition Technology, Des Plaines, Ill.) are two tiny, clear crescent-shaped pieces of a plastic polymer that are inserted into the cornea.
The FDA in July 2004 granted Intacs a Humanitarian Device Exemption to allow corrections of keratoconus largely because of Intacs' safety record and because only a few treatment options, such as corneal transplants, are available for keratoconus.
The approval allows Intacs to be marketed for reduction or elimination of myopia and astigmatism in keratoconus patients where functional vision is no longer obtained with contact lenses or eyeglasses.
In early January 2006, the FDA also formally acknowledged that the Intacs implants are therapeutic devices that can be described in company literature as corneal implants, rather than prescription inserts.
The corneal implants are designed for long-term vision correction. Because Intacs are an additive technology, patients who are not satisfied with the visual results or who are troubled by visual symptoms (about 4 percent) can have a surgeon remove the Intacs if they wish.
Intacs can be replaced with different-size implants or removed for good. You have the option of replacing them with new rings at a later date if your prescription changes with age.
If Intacs are removed permanently, vision tends to return to the way it was before surgery within three months. Those receiving replacement Intacs have obtained good visual results as well. These subsequent activities have been free of serious incident.
 Intacs for myopia or keratoconus work by flattening corneal curvature. Photo provided by the manufacturer.
How Do Intacs Work?
For treating nearsightedness, Intacs correct vision by flattening the cornea to refocus light rays and improve vision. For keratoconus, Intacs work by flattening the steep part of the cornea or cone to reduce vision distortions. Intacs are made of the same biocompatible material found in cataract lens implants (intraocular lenses), so there is not much risk of adverse effects from the material.
In a very few cases, however, eye irritation (blepharitis) or abnormal blood vessel growth (neovascularization) may occur. Also, Intacs may produce no corrective effect in fewer than 5 percent of individuals with keratoconus.
The procedure takes about 15 minutes and is done on an outpatient basis: you walk in and walk out later, but will need someone to drive you after surgery. Before surgery, the doctor places anesthetizing drops in your eye and may give you a mild oral sedative.
During surgery, the doctor creates a tunnel between layers of the stroma, outside of the central optical zone. The surgeon then chooses the appropriate ring thickness. A thicker ring in Intacs means more flattening of the cornea, which increases the level of vision correction achieved. After one or two crescent-shaped Intacs are inserted into the tunnel, the procedure is over.
|